PPF is an abbreviation for Paint Protection Film. PPF is made by layering a film base (polyurethane elastomer), an adhesive layer, and a topcoat layer. The purpose of PPF installation is to protect car bodies and windshields from scratches, gravel, dirt and UV rays.
Compared to coatings and waxes, PPF offers greater protection and can be removed to restore the car to its original condition, thus retaining the condition of a new car and allowing it to maintain resale value. While a typical wax requires reapplication every month or so, and a coating agent (resin) every 2-3 months, PPF does not need to be replaced for years.
Did you know that coatings and waxes can also be a source of dirt and dullness? Coating agents and waxes that get into the crevices of car wash scratches can damage the shine of the car body.
The cost of a paint protection film installation depends on many different factors, primarily the size of the vehicle, PPF coverage options and the type of film you’d like to use. There isn’t a standard price tag for a high-quality, professional installation.
Generally, full car wrap installation takes about two days. However, we recommend leaving your car in the shop for another day to help ensure proper adhesion of the film to the car has been achieved. Depending on different factors, for example, climate and technique used during application. Durability can be shortened if the film is applied improperly. If you’re looking for a partial car wrap, then the time needed will be much shorter. Depending on your wrap, the installer will be able to inform you of the amount of time that it will require.
In most cases, it is recommended to apply PPF over a panel that is defect free to get the best protection. There is nothing wrong with applying PPF over paint defects, however, slight air pockets around the defects might occur (this includes areas with touch-up paint applied) and PPF will magnify the imperfections. Cosmetic repair options such as Paint Correction, Polishing, Touch Up Paint and Body Work Corrections are highly recommended before installation.
No special care is required. Simply wash your vehicle as usual. Polishing & waxing is not required either. If well maintained, PPF can ensure glossiness and shine of your vehicle.
A car with PPF installed saves a lot of time and effort in washing the car. Using a neutral or mild soap, a soft sponge and a microfiber cloth, hand washing the car is optimal. Rinse thoroughly with water and dry gently. Due to the properties of PPF, minimal effort is required to keep your car clean and shiny.
Treat your vehicle with care and regular washing. If possible, try to avoid using any type of scraper or intense power washers as these may cause damage. High-pressure washers can be used but be extremely careful as the sheets may come off. Avoid abrasive materials or harsh chemicals that may damage the film.
Although washing with water is sufficient to remove dirt, it is recommended to shampoo and wash thoroughly on a regular basis. In doing so, choose a neutral one, as strong acidity or alkalinity will adversely affect PPF.
Prolonged exposure to the elements will reduce durability of the PPF. Especially parking outdoors for hours under constant UV bombardment.
In regard to acidic substances like oils, bug acid, bird feces, do not let it sit and immediately remove it.
If the vehicle is not properly maintained, there will be disadvantages in terms of aesthetics and functionality.
In terms of functionality, if stains and water spots (water stains) on PPF are left unattended, the self-repair function might not be able to work properly, leaving scratches and water repellency will deteriorate. In order to maximize the original function and maintain its effectiveness, we recommend washing the car at least once a month and a deposit remover if water spots form.
Minor scratches or scuffs on PPF can often be repaired using heat or specific PPF repair solutions. However, for significant damage, it's recommended to consult a professional PPF installer for proper assessment and repair.
STARX’s PPF is designed to resist yellowing, but exposure to UV rays and environmental pollutants can affect its appearance over time. Regular cleaning, waxing, and using UV resistant sprays can help minimize the risk of yellowing.
No, the film has patented adhesive that allows for removal without damaging the OEM paint.
Color PPF, or Color Paint Protection Film, is a thin, transparent layer applied to the exterior surfaces of a vehicle to protect the paint from stone chips, bug splatter, bird droppings, and other environmental contaminants. Unlike traditional PPF, Color PPF is designed to enhance the appearance of your vehicle with a variety of color options.
Previously, color vinyl was commonly used for branding and advertising purposes for commercial vehicles. Now, it is becoming increasingly popular for privately owned vehicles for color change purposes. Full vehicle wraps became a great choice for any new car, van or commercial vehicle. And unlike color vinyls, Color PPF also provides a robust durable layer of protection to your vehicle’s bodywork at the same time!
The cost of the color PPF depends on many different factors, primarily the size of the vehicle, coverage options and the specific car film you’d like to use. There is no standard price tag for a high-quality, professional car film. Think of it like commissioning any work of art, the range in price can be huge, depending on your specifications.
It is important that we receive the vehicle in the best possible condition before it is brought to us. If a vehicle arrives in poor or dirty condition, it will affect the timescale quoted and may require additional prep work which could lead to additional costs
Yes, Color PPF is suitable for a wide range of vehicles, including cars, trucks, motorcycles, and more. It provides protection and enhances the appearance of any vehicle's paint.
The lifespan of Color PPF depends on various factors, including environmental conditions and maintenance. Depending on different factors, for example, climate and technique used during application. Durability can be shortened if the film is applied improperly. Color PPF needs to be washed from time to time and it is also advised to use special spray on products for protection. The lifespan of color PPF will also greatly depend on regular washing & maintenance. Typically, high-quality Color PPF can last anywhere from 5 to 10 years or more with proper care.
A car with Color PPF installed saves a lot of time and effort in washing the car. Using a neutral or mild soap, a soft sponge and a microfiber cloth, hand washing the car is optimal. Rinse thoroughly with water and dry gently. Due to the properties of PPF, minimal effort is required to keep your car clean and shiny.
Treat your vehicle with care and regular washing. If possible, try to avoid using any type of scraper or intense power washers as these may cause damage. High-pressure washers can be used but be extremely careful as the sheets may come off. Avoid abrasive materials or harsh chemicals that may damage the film.
Although washing with water is sufficient to remove dirt, it is recommended to shampoo and wash thoroughly on a regular basis. In doing so, choose a neutral one, as strong acidity or alkalinity will adversely affect PPF.
Prolonged exposure to the elements will reduce durability of the PPF. Especially parking outdoors for hours under constant UV bombardment.
In regard to acidic substances like oils, bug acid, bird feces, do not let it sit and immediately remove it.
If the vehicle is not properly maintained, there will be disadvantages in terms of aesthetics and functionality.
In terms of functionality, if stains and water spots (water stains) on PPF are left unattended, the self-repair function might not be able to work properly, leaving scratches and water repellency will deteriorate. In order to maximize the original function and maintain its effectiveness, we recommend washing the car at least once a month and a deposit remover if water spots form.
Yes, you can wax or polish Color PPF. However, it's essential to use products specifically designed for PPF to avoid any adverse reactions. Choose a non-abrasive wax or polish and apply it with a soft applicator pad. Regular waxing helps maintain the film's glossy appearance. Spray on products containing liquid wax like nano coating are good for most types of wraps. No special after care is required for Color PPF. Just regular car washing.
Minor scratches or scuffs on Color PPF can often be repaired using heat or specific Color PPF repair solutions. However, for significant damage, it's recommended to consult a professional PPF installer for proper assessment and repair.
No, you do not need to inform your insurance company of such changes, because color wrapping is not permanent like car paint color change. If you have hesitations about any insurance issues, you may inform JPJ & insurance company to update about color change of the vehicle.
Yes, Color PPF can be removed. Professional installers use a heat gun and a gentle adhesive remover to peel off the film without damaging the vehicle's paint. However, it's advisable to seek professional help for a safe and effective removal process. Please note that paint can be damaged on parts that have been repaired and repainted (non-OEM paint job).
Reputable brands enlist the help of trusted manufacturers (normally base in U.S.A) accredited with test reports and certifications from the Country of Origin or from our Country SIRIM QAS International Sdn Bhd. It’s very easy to verify their credibility as manufacturers’ information and their relationship with brand owners or importers are listed on both parties’ websites.
It is vital to select products produced by reputable manufacturers with a good track record. That’s because only credible manufacturers will invest in cutting-edge technologies, advanced laboratories and premium raw materials to produce high quality automotive films. Besides that, only reputable manufacturers will conduct extensive Research and development to push the boundary of technology to create the right formulation to produce good quality automotive films.
Reputable automotive films are tested intensively before they are presented to the mass market. You should look out for test reports that are accredited to determine their performance and quality.
Branded automotive films often have their brand identification printed on both the films as well as on the packaging that comes with the films complete with Barcodes. Typically, generic or counterfeit car films do not have the brand indicated on the films and come in plain white boxes.
After installation of automotive film, ensure your warranty is registered & active. Insist at the automotive film shop to show you the warranty certificate for your automotive film. This is to ensure the product is genuine and warranty is active to protect your right to any claims.
Please be aware that without the Warranty Certificate issued by STARX Malaysia Sdn Bhd, we shall indemnify ourselves from any such claims. However, with your warranty registered & active, you have ease of mind that you can claim the warranty without hassle.
In short, be a smart consumer. Pick an automotive film brand that is trusted, do your RESEARCH on the product and test or verify all claims. With these steps in your back pocket, choosing the best automotive film to fit your needs and budget is possible.
